top of page

Paying Someone as a Contractor Does Not Settle Their Worker Status

Writer: Michelene Desravines
Michelene Desravines
Nov 9
11 min read

What business owners should review about the working relationship before deciding how to classify and pay someone.


Most business owners make the classification decision at the moment they set up payment. They ask for a Form W-9, agree on a rate, and plan to send a Form 1099-NEC in January, and the matter feels closed. The IRS does not treat it as closed. Its own guidance says a written contract calling someone a contractor is not enough to determine the worker's status. Florida takes the same view for state purposes. The Florida Department of Revenue's Employer Guide to Reemployment Tax says that how a worker is treated, and not a contract or a 1099, determines whether the person is an employee or an independent contractor. The form you issue at year end is the result of a classification decision, and it needs facts behind it. A review of the working relationship before the first payment costs far less than a correction made after an audit or after the worker files a claim.


Why a contract and a 1099 do not decide the question


For federal employment tax purposes, the IRS applies the usual common law rules to decide whether someone is an employee, as explained in Tax Topic 762. In plain terms, the question is how much control the business has over the person doing the work. The IRS states that a worker is an employee when the business has the right to direct and control the work, even if that right is never used. That detail matters because an owner who is hands off with a trusted helper may still be the employer if the owner could step in and dictate when, where, and how the work gets done. The title on the agreement and the form issued in January are evidence a reviewer may look at, but neither can replace the facts.


The reason this matters comes down to who carries the payroll obligations. When someone is an employee, the business withholds income tax from pay, withholds and matches Social Security and Medicare taxes, pays federal unemployment tax, and pays Florida reemployment tax. When someone is an independent contractor, the business pays the invoice and reports the payment, and the contractor handles their own taxes. If a business treats an employee as a contractor, the obligations that should have been met do not disappear. They stay with the business, and they can surface years later when a worker files for unemployment benefits, asks the IRS for a determination, or the business is selected for an audit.


The three categories the IRS uses to weigh the evidence


The IRS sorts the evidence into three categories, which are behavioral control, financial control, and the relationship of the parties, as described in Topic 762 and Publication 1779. No single category decides the outcome, and no single fact within a category does either. A reviewer looks at the whole relationship and asks where the weight of the evidence falls. Because this is a weighing exercise and not a checklist, two businesses with similar paperwork can reach different results when their day to day practices differ. Understanding each category in plain language is the best way to see where your own arrangement stands.


Behavioral control


Behavioral control asks whether the business has the right to direct not only what work is done but how it is done. Instructions about when and where to work, which tools to use, whom to hire as helpers, and what order to follow all point toward an employee. Training is another signal, since a business generally trains employees to perform services in a particular way and does not train independent contractors. Evaluation systems matter as well. A review that measures how the person performs the details of the work points toward employment, while a review that looks only at the finished result does not. Consider a bookkeeper who delivers reconciled books by the fifteenth of each month using her own software and her own schedule, compared with a bookkeeper who works set hours at the owner's office, follows the owner's checklist, and attends weekly staff meetings. The first arrangement leans toward contractor and the second leans toward employee, even if both are paid on a 1099.


Financial control


Financial control looks at whether the business directs the economic side of the job. The IRS considers whether the worker has a significant investment in equipment, whether business expenses are reimbursed, whether the worker offers services to the general market, how the worker is paid, and whether the worker can earn a profit or suffer a loss. A worker who buys software, carries insurance, markets to other clients, and absorbs the cost of a project that runs over looks like a business owner. A worker who is paid a guaranteed amount per hour or week, uses the owner's equipment, and has expenses reimbursed looks like an employee, and the IRS training materials on worker classification note that minor expenses paid by an employee do not turn the relationship into a contractor arrangement. A flat fee per project is common for contractors, although Publication 15-A recognizes that hourly billing is customary in some professions, such as law. Payment method is one clue and not a verdict.


Relationship of the parties


The relationship of the parties covers how the business and the worker understand their arrangement. A written agreement describing the intended relationship is relevant, but the IRS says a contract by itself does not settle status. Employee type benefits such as health insurance, a retirement plan, paid vacation, or sick pay point toward employment, as Topic 762 explains. The permanency of the relationship also matters, since an arrangement meant to continue indefinitely looks more like employment than a project with a defined scope and an end date. The IRS also considers whether the services are a key part of the regular business, because a company usually wants to direct the work that is central to what it sells, as Publication 1779 describes.


What to review before you classify and pay someone


A useful review starts with plain questions answered with facts and not with hopes. Who decides how the work is done, and who decides when and where? Whose equipment and software are used, and who pays for them? Does the person have other clients, a business name, a business license where one is required, and insurance of their own? Is the person paid by project invoice or by hours worked, and can the person send a substitute or hire an assistant without your approval? Could you end the arrangement at any moment with no consequences, or does the agreement give the person recourse if you cancel early? That last question matters in Florida, where the Department of Revenue guide says a true contractor generally cannot be terminated summarily without recourse.


Documentation matters because it records the facts as they existed when you made the decision. A signed agreement that describes the scope of work, the deliverables, the fee, who supplies tools, and the contractor's freedom to work for others is a sensible start. A completed Form W-9 before the first payment, invoices from the contractor, and proof of the contractor's own business registration or insurance add support. Records should match what happens day to day, because a polished agreement will not help if the person works fixed hours under your supervision. When the paperwork and the practice disagree, reviewers follow the practice.


Form 1099-NEC thresholds and why they do not answer the classification question


The reporting threshold for Form 1099-NEC changed for payments made in 2026. Under section 70433 of the One Big Beautiful Bill Act, the threshold rose from $600 to $2,000 for payments made after December 31, 2025, with inflation indexing to follow, according to Crowe and the National Association of Tax Professionals. Payments made in 2025 still follow the $600 rule, and 2026 payments are reported on forms due in early 2027. If a business withheld federal income tax under the backup withholding rules, it must still file the form no matter how little was paid, as this 1099-NEC guide explains.


The higher threshold answers a reporting question and leaves the classification question untouched. The common law tests do not contain a dollar floor, so someone paid $1,500 who works under your direction, on your schedule, with your equipment may still be an employee. In the other direction, a contractor paid $5,000 who runs an independent business still receives a 1099 and is still a contractor. Because 2026 payments are reported early next year, the final weeks of the year are a practical time to collect any missing Forms W-9, total what each contractor has been paid, and ask whether each arrangement still looks like contracting. Doing that now leaves time to correct course before filing season.


What happens when a contractor is later treated as an employee


If the IRS or a state agency concludes that a worker was an employee, the business becomes responsible for employment taxes it did not withhold or pay. When the misclassification was not intentional, Internal Revenue Code section 3509 provides reduced rates. According to an IRS letter describing the rule, the income tax liability is set at 1.5 percent of wages and the employee share of Social Security and Medicare tax is reduced to 20 percent of the usual amount, while the employer share and federal unemployment tax are not reduced. Those rates apply when the business filed Forms 1099 for the workers. When the forms were not filed, the statute doubles them to 3 percent for income tax and 40 percent of the employee share, and attorneys at Faegre Drinker note that the reduced rates are unavailable altogether when the business intentionally disregarded the rules.


Here is how that works in numbers. The employer share of Social Security and Medicare is 7.65 percent, 20 percent of the employee share adds 1.53 percent, and the 1.5 percent income tax rate brings the total to 10.68 percent of wages up to the Social Security wage base, as a Tax Notes analysis lays out. On $50,000 paid to one misclassified worker, that comes to about $5,340 for a single year, before federal unemployment tax, Florida reemployment tax, interest, and any penalties. Multiply that by several workers and several open years and the amounts grow quickly. These figures also assume the misclassification was unintentional, since intentional disregard can lead to the full amounts and additional penalties.


Three ways to get relief or a formal answer

Section 530 relief


Section 530 of the Revenue Act of 1978 gives businesses relief from federal employment tax liability when three requirements are met, according to IRS Publication 1976. The first is reporting consistency, which means the business filed all required returns, including Forms 1099, in a way that matches its treatment of the worker as a contractor. The second is substantive consistency, which means the business did not treat that worker, or anyone in a substantially similar position, as an employee. The third is a reasonable basis, which can come from a prior IRS audit, a court decision, a longstanding practice in the industry, or other reasonable grounds such as advice from an accountant who knew the facts of the business. Relief is not available for any year in which the required information returns were not filed. This is a relief provision and not a classification rule, as the IRS explains, so it can protect the business without making the worker a contractor, and it does not extend to the worker, who may still owe the employee share of Social Security and Medicare tax. The IRS clarified how the reasonable basis rules work in Revenue Procedure 2025-10.


The Voluntary Classification Settlement Program


The IRS Voluntary Classification Settlement Program, known as VCSP, lets an eligible business reclassify workers as employees going forward with partial relief for the past, as the IRS describes. The business applies on Form 8952 and agrees to treat the workers as employees for future periods. It pays 10 percent of the employment tax that would have been due on those workers' pay for the most recent tax year, figured at the reduced section 3509(a) rates, with no interest or penalties on that amount and no employment tax audit of the prior years' classification of those workers, according to the Journal of Accountancy. Using the 10.68 percent figure above, that works out to roughly 1.07 percent of the prior year's pay, which is consistent with the IRS description of just over one percent of wages. Eligibility generally requires that the business consistently treated the workers as contractors, filed the required Forms 1099, and is not under an IRS or Department of Labor employment tax audit. Every worker in the same class must be reclassified. This option suits a business that has reviewed its arrangements, concluded that some workers look like employees, and wants a cleaner path than waiting for an audit.


Form SS-8


Either the worker or the business can file Form SS-8 to ask the IRS for a determination of the worker's status. The process is not an examination of a tax return, so the appeal rights available in an audit do not apply, and the IRS notes in the letter cited above that an SS-8 determination does not change the business's right to Section 530 relief. Processing commonly takes at least six months, according to the IRS. A worker can file without the business's involvement, which means a business may receive a request for information about an arrangement it considered settled. Because the result can go either way and the filing invites a formal review, a business should speak with its CPA before choosing to file, and should respond promptly and accurately if a request arrives.


Florida reemployment tax and the state's own review


In Florida, the Department of Revenue administers the reemployment tax, which is the state's version of unemployment tax. The Department's Employer Guide to Reemployment Tax explains that an employee is subject to the employer's will and control as to what is done and how it is done, while an independent contractor is not controlled in the manner or method of the work. The guide adds that contractors generally hold themselves out to the public as contractors, furnish materials, use their own tools, and cannot be terminated without recourse. It also says a contract for labor only will normally be treated as employment. Those statements put the weight on daily treatment, which is why a clean 1099 history does not protect a business whose working practices look like employment.


The cost of getting it wrong in Florida is separate from the federal cost. According to the guide, new employers start at a 2.7 percent rate, the maximum rate is 5.4 percent, and the tax applies to the first $7,000 of each employee's wages per year. The Department can require corrected reports going back five years, and employers must keep work records for five calendar years, including items such as independent contractor agreements and Forms 1099 that auditors may request. The guide also states that intentional misclassification of a worker is a felony. Florida practitioners report that the Department audits about one percent of contributing employers each year and treats misclassification as a leading source of underpayment, according to a Florida tax law blog.


Classification can affect more than tax. Florida applies a ten factor common law approach for both unemployment and workers' compensation purposes, according to the law firm Shutts, so an arrangement that fails the reemployment tax review may also raise questions with a workers' compensation carrier. Business owners who use contractors should ask their insurance agent how their policy treats independent workers and subcontractors. A CPA can coordinate the tax review, and an insurance professional can address the coverage side.


Federal labor law uses a different test


The Fair Labor Standards Act, which governs minimum wage and overtime, uses an economic reality test that asks whether a worker is economically dependent on the business or is in business independently. That test belongs to the Department of Labor and does not control the Internal Revenue Code or state tax law, as Linklaters notes in its review of the 2024 rule. The Department announced in May 2025 that it would stop enforcing that rule, according to OneDigital. On February 26, 2026, it proposed a rule that would rescind the 2024 version and return to a test built around two core factors, which are the nature and degree of control and the worker's opportunity for profit or loss, as K&L Gates reports. Business owners should confirm where that rulemaking stands before relying on it, since this proposal marks the third change in five years. A worker can be a contractor for one purpose and an employee for another, which is why each test needs its own look.


Reaching a classification you can defend


Classification is a conclusion drawn from facts, and the strongest position is one where the paperwork, the payment records, and the daily working relationship all point the same direction. When they do not, the time to change course is before a worker files a claim or an agency opens an audit, because the relief options generally reward businesses that act early and file their information returns consistently. A review of each person paid on a 1099 this year, with attention to control, financial arrangements, and the nature of the relationship, takes far less effort than a correction under examination. Where a worker looks like an employee, a CPA can help estimate the cost of reclassifying, compare the relief options, and set up payroll correctly going forward. Where a worker looks like a contractor, the same review produces a file that supports the decision if it is ever questioned.


Comments


bottom of page